User Manual

Chapter 3 Configuring Wireless LAN Card Settings
15
Network Type: You can connect your WLAN card to a network in one of the following two
ways:
Peer-to-Peer
(Ad Hoc Mode)
Connecting to other Wireless LAN Card equipped computers,
forming a wireless network.
Access Point
(Infrastructure Mode)
Connecting to a wired/wireless network through an Access
Point.
Peer-to-Peer Channel: Select the operating radio channel used to communicate with another
WLAN card. This field is not applicable if you are using Access Point (Infrastructure) network
type. Instead, the Wireless LAN Card will automatically scan for the right channel at which
the Access Point operates.
Transmit Rate: Select the speed (bit rate) that will be used for transmitting wireless data.
Owing to the RF modulation characteristics, the 1 Mbps operation speed sustains a longer
working range than 2 Mbps and like wise. Select the proper operation speed that best meets
your throughput and working range requirement.
Defaults: This button allows you to restore default settings.