User Manual

Chapter 3 Configuring Wireless LAN Card Settings

Signal Strength: Displayed as percentages using active progress indicators that change as the

network radio signal fluctuates.

Note: If you are in Peer-to-Peer mode, the Signal Strength and Link Quality fields are not

applicable. Both fields are dimmed.

Enable/Disable Radio: The button allows you to enable/disable radio operation. If you

disable the radio transmission, your WLAN card stops sending radio signals and you are

disconnected to the wireless network. In the mean time, the Status filed displays Radio Off.

Rescan: Allows you to immediately rescan the radio channel searching for available Access

Point/Wireless Station.

Figure 3-1 PRISM Wireless Settings Utility – Status Tab