User Manual

Chapter 2 - Installing the Wireless LAN Card

Depending on your operating system, following situation may occur:

• For Windows 2000: If you are prompted with one or a couple of Digital Signature not

Found alarm messages, just click Yes to continue with the installation.

• For Windows XP: When Found New Hardware Wizard appears, have Install the

software automatically selected and follow the on-screen instructions to proceed. If

compatibility message appears, just click Continue Anyway.

2. Click Finish and follow system prompts to complete the installation.

Now you are done with the driver and software installation procedure. Select Start >

Programs > Askey > IEEE 802.11b. You should be able to see the PRISM Wireless

Settings utility icon appearing on the system tray. You may proceed to next chapter to

configure or fine-tune your Wireless LAN Card settings.

If you are going to configure countries for your Modem Card, refer to “Chapter 4 Country

Selection for Mini PCI Modem Card” on page 27.

Note: If you need to set up the TCP/IP properties for your Wireless LAN Card, refer to

“Appendix C Setting Up TCP/IP” on page 79 for details.