User's Manual
Table Of Contents
- Table of Contents
- Section 1
- Section 2
- Section 3
- Installation and Configuration Procedures Under Windows 98/Me/2000
- 3.1 What You Need to Know About Windows 98/Me/2000
- 3.2 What You Will Need
- 3.3 Installing the Application and Drivers Under Windows 98/Me/2000
- 1. Insert the Firmware and Software Tools CD into your CD-ROM drive and locate the executable fil...
- 2. Follow the installation instructions from the InstallShield Wizard by pressing the “Next” button.
- 3. During the setup process, the window of Figure 3-1 will appear prompting you to select the ada...
- Figure 3-1. Selection of adapter type
- Figure 3-2. Operating Mode Dialog
- Figure 3-3. ESSID and Channel Dialog
- Figure 3-4. Operating Mode Dialog
- Figure 3-5. ESSID Dialog
- 1. Insert the Firmware and Software Tools CD into your CD-ROM drive and locate the executable fil...
- 3.4 Uninstall Procedure Under Windows 98/Me
- 3.5 Uninstall Procedure Under Windows 2000
- Section 4
- Section 5
Installation Overview
2-2
Upgrading your Wireless LAN Software when a new setup is released:
For Windows 98/Me
•Power on the computer (laptop).
•Uninstall the application by running the uninstall program.
•When prompted for reboot select “YES”.
•After rebooting run the new setup.exe.
•When the setup of the application (see instructions above) is completed, you can then
plug your USB (A) card.
Note:
If you select the ”Application Only ” Installation option the installation procedure
will only install the Utility while selecting any other option it will also install the
latest drivers for your wireless card without prompting you.
For Windows 2000
•Power on the computer (laptop).
•Uninstall the application by running the uninstall program.
•When prompted for reboot select “YES”.
•Run the new setup.exe.
•When the setup of the drivers and application (see instructions above) is completed,
you can then plug your USB (A) card.