User Manual
Table Of Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Installing the Wireless LAN Card
- Chapter 3 Using Wireless LAN Utility
- Chapter 5 Windows XP Wireless Zero Configuration Utility
- Chapter 6 Uninstalling the Wireless LAN Card
- Chapter 7 Troubleshooting
- Appendix A Limited Warranty
- Appendix B Setting Up TCP/IP
- Glossary
Chapter 7 Troubleshooting
47
Cannot Connect to Another Wireless LAN Card
If you cannot make a connection to another Wireless LAN Card from your computer, it could
be due to one of the following reasons:
•
Incorrect SSID. Make sure the SSID is the same for all computers that have a
Wireless LAN Card.
•
Changes are not being recognized by your computer. Restart your computer.
•
If in Ad-Hoc mode, make sure the Log on to Windows NT domain check box is
not selected in the Client for Microsoft Networks Properties dialog box in the
Network Configuration tab.
•
Incorrect IP Address or Subnet Mask. Check these settings in the TCP/IP
Properties dialog box in the Network Configuration tab.
Poor Link Quality
If the Link Quality display stays in the poor range, it could be due to one of the following
reasons:
•
Radio interference.
•
Distance between Wireless LAN Card and the target Access Point or wireless client
is too far. Decrease the distance between the Wireless LAN Card and Access Point
or wireless client.