User Manual

11Mbps Wireless LAN Card User's Manual
22
•
Shared Key: If your targeted wireless network uses Shared Key, your wireless
adapter must be set to use correct WEP to pass the authentication. If selected, your
wireless adapter must use identical WEP keys as the targeted wireless network.
3. In the Network key and Confirm network key fields, enter 40bits or 104bits WEP keys
in hexadecimal format. Note that the WEP keys must be the same as your target wireless
network.
When using Hexadecimal format, only digits 0-9 and letters a-f, A-F are allowed. Make
sure to enter the character matching the required key format and length as below:
ASCII characters Hexadecimal digits
40 bits 5 alphanumeric characters 10 hexadecimal digits
104 bits 13 alphanumeric characters 26 hexadecimal digits
4. In the Key index (advanced) field, select an index for the key you entered.
After finishing all required settings, click OK. You will return to the Config screen and found
the new profile named after the SSID you entered in the Available Profiles list.