User's Manual

11Mbps Wireless LAN Card User's Manual
18
•
Shared Key: If your targeted wireless network uses Shared Key, your wireless adapter must be set to use correct WEP to pass the
authentication. If selected, your wireless adapter must use identical WEP keys as the targeted wireless network.
3. In the Network key and Confirm network key fields, enter 40bits or 104bits WEP keys in hexadecimal format. Note that the WEP keys must be
the same as your target wireless network.
When using Hexadecimal format, only digits 0-9 and letters a-f, A-F are allowed. Make sure to enter the character matching the required key
format and length as below:
Hexadecimal digits
40 bits 10 hexadecimal digits
104 bits 26 hexadecimal digits
4. In the Key index (advanced) field, select an index for the key you entered.
After finishing all required settings, click OK. You will return to the Config screen and found the new profile named after the SSID you entered in the
Available Profiles list.