User's Manual

23
Configuring Gigaset PC Card 108
ì WPA
If WPA is used for authentication in your network, you must select the parameters
according to the settings for the network. Contact your administrator.
A window opens to configure the mode.
WEP
ì For the Authentication Type select the default setting Open. The setting Shared is
normally only used in networks with authentication. Contact your administrator for
more information.
ì In the Key Length field, select the required length of the WEP key.
Note that all components in a network must use the same key length to be able to
communicate with each other.
Use a key of length 128 bit if all network components support this. This offers
greater protection for the data in your network.