User's Manual

7
2. Windows 2000
This chapter describes the Windows 2000 driver installation.
Driver Installation (First-Time Install)
This section describes the first-time installation for the driver for
Windows 2000. If you have a previously installed driver, refer to the
section “Driver Installation (Previous Driver Installed)”.
We recommend that you remove any existing drivers (NDIS, DK, or
TDI) on the PC system before installing the Version 1.0 release of
the NDIS driver. See Section “Driver Uninstallation” for the
instruction on how to remove previous driver releases.
Insert the Wireless Network Adapter into a 32-bit CardBus slot and
follow these steps to install the NDIS driver:
1. Wait for the following dialog box to display.
2. Click Next to continue.
3. Choose “Search for a suitable driver for my device
(recommended)
4. Click Next.
5. Insert the Release CD in your CD-ROM drive.
6. Choose Specify a location under “Optional search locations.”
7. Click Next to continue.
8. Browse to the location where the NDIS driver is located
(assuming D is the CD-ROM drive),the default folder is D:\ndi
\bin \production \ndi 5.
9. Click OK to continue.
10. When you find the driver installation file (net5211.inf),click Next
to continue.
11. The NDIS evaluation driver currently does not have a digital
signature from Microsoft. Therefore, Windows 2000 show a
warning message. Click Yes to proceed with driver installation.