User's Manual

Error! Style not defined.. Error! Style not defined.

Select one of the configuration under the configuration, click Modify

or New and complete the steps in “Infrastructure Mode” or “Ad Hoc

Mode” to set up the station to work in infrastructure mode or ad hoc

mode, respectively.

Selecting Encryption Types

We support two encryption type ;Wired Equivalent Privacy

(WEP)and Advanced Encryption Security (AES). Refer “Selecting

Encryption Types” in chapter 2 for details.

TCP/IP Setup

After configuring the Wireless Network Adapter through the

Network Control Panel, the TCP/IP address for the network device

needs to be configured.

1. From the Start menu, choose Programs >Accessories

>Communications >Network Connections. Find the “Local

Area Connection” that is associated with the Wireless Network

Adapter. Right-click that connection and click Properties.

2. Select “Internet Protocol (TCP/IP)” and click Properties.

3. Click “Use the following IP address” and input an IP address

and Subnet mask. Depending on the type of network the

station connects to, Gateway and DNS Configuration

information can also be required. IP configuration information

(DHCP or assigned IP address, Gateway and DNS server IP

addresses) is usually obtained from the corporate IT staff. For

a simple demonstration, the station is assigned a static IP

address.

4. Click OK in both “Internet Protocol (TCP/IP) Properties” and

“Local Area Connection Properties” to complete the IP

configuration..

7. To map the drive on another machine to your computer, from

the Start menu, choose My Computer and right-click to select

“Map Network Drive....”