User's Manual

Error! Style not defined.. Error! Style not defined.

802.11b Range Selects either normal (uses all four 802.11b transmit

rates)or extended range (limits network to 1 or 2 Mbit

range).

Encryption Type Specifies the encryption types: _ WEP -u e only WEP

encryption. _ AES -

only associate with Acce Point that can

successfully negotiate AES encryption. _ Auto -Allow the

STA and AP to negotiate the encryption type.

Scan Mode Specifies passive, or auto canning (use country code to

select the type of scan, active or passive).

Transmit Power Select full, half, quarter, eighth, or minimum transmit

power.

QoS Disables or enables the station to cooperate in a network

using Quality of Service.

To change the encryption type, take the following step:

1. From the Network Configuration Settings dialog Advanced tab,

use the Encryption Type drop-down menu to specify the

encryption type.

2. Click OK to enable your change.

CAUTION: To successfully transmit data frames, specify a

unique key.

NOTE: If AES and ad hoc are both specified, the STA will use

WEP.

NOTE: Fragmentation is currently not supported using AES.

Infrastructure Mode

To configure an Wireless Network Adapter in infrastructure mode:

1. Ensure that the “Locally Administered Address” checkbox is

unchecked.

2. Enter information in the General dialog as summarized in

Table 2-4.