User's Manual

3. Windows Millennium Edition

This chapter describes the Windows Millennium Edition network

driver installation.

Driver Installation

We recommend that you remove any existing NDIS driver on the

PC y tem before installing Version 1.0 release of the NDIS driver.

See “Driver Uninstallation” for the instructions on how to remove

previous driver releases. When the system no longer has the NDIS

driver Installed, insert the Wireless Network Adapter into a 32-bit

CardBus slot, and follow these teps to install the NDIS driver:

1. Wait for the following dialog box to appear. Choose “Specify

the location of the driver (Advanced),” and click Next to

continue.

2. Choose “Search for the best driver for your

device.(Recommended).”

a. Select “Specify a location.”

b. Click Browse to locate the NDIS driver. The default folder is

“E:\ndis \bin \production \ndis5” (assuming E: is the

CD-ROM drive).

c. Click Next to continue.

3. When the driver installation file (NET5210B.INF)has been

found,

4. Click Finish to continue, and restart the system to complete

driver installation. Refer to “Device Configuration” for device

configuration.