User's Manual

Wireless Broadband Router User Manual
16
and Maximum.
Locally Administered Address
(LAA)
This field defines the locally administered MAC
address. To enter a value in the address field, the
check box needs to be selected.
3. Select “Internet Protocol (TCP/IP)” and click Properties .
4. Click “Use the following IP address” and input an IP address
and Subnet mask. Assigning an IP address and Subnet mask
allows stations to operate in infrastructure mode and to have
Internet access.“ Default gateway”and “DNS
server”information is also required. IP configuration information
(DHCP or assigned IP address, Gateway and DNS server IP
addresses) is usually obtained from the corporate IT staff.
5. After obtaining IP configuration information from the
appropriate IT staff, click OK in both “Internet Protocol (TCP/IP)
Properties” and “Local Area Connection Properties” to
complete the IP configuration..
6. Choose Start >Programs >Accessories >Command Prompt to
open the DOS command prompt window.
7. Type “ipconfig” at the C::\>prompt to determine if the TCP/IP
configuration has taken effect. To test IP connectivity in ad hoc
or infrastructure mode, use the ping <ipaddress> command.
When a TCP/IP connection is established, the LinkMon utility
can be used to monitor the Wireless Network Adapter
operating status.
8. To map the drive on another machine to your computer,
right-click “My Computer” and click Map Network Drive....
9. After mapping the drive, you can perform file transfers, use
video streaming applications, and all other network data
transfer that are normally performed with wired 10/100
Ethernet connections.