User's Manual

11Mbps Wireless LAN Card User Manual
40
The Log Settings tab provides a couple of logging mode choices. The number and type of
available options may differ, subject to the diagnostics mode you selected.
? Data logging off
Allows to deactivate the logging mode.
? Manual (Manual Logging Mode)
The Manual Data Logging option enables you to create log entries upon user-command.
When this option is enabled, you can manually create log file by clicking the Log Once
button. After clicking Log Once, you will be prompted to choose whether to overwrite or
append to the existing log file.
The Manual Data Logging option can be used in combination with the option Add
comments to log to add your description on specific event or location to allow easy
identification of the event or location afterwards. If Add comments to log is checked,
each time you click the Log Once button you will be prompted to enter a description as
the log information. The description will be appended to the end of the log file.
? Automatic (Automatic Every n Seconds)
Using this Log option, you can create log entry automatically at regular intervals you
specified in the Log every …seconds field. You can enter the value in the range of '0 to
999999'
Each time the Client Manager appends data measurements to the selected log file, it will also
reset the Test Results tab sheet.