User's Manual

Chapter 2 Installing the Wireless LAN Card

This chapter describes the installation process for the driver and software for the Wireless

LAN Card. Proper driver installation is to allow the device to operate on your host computer

while the utility software, Wireless Client Manager, is to help you configure and monitor your

Wireless LAN Card.

The Wireless LAN Card installation as outlined below:

1. Install the hardware and then driver installation process will be conducted by the

Windows PnP (Plug-and-Play) wizard.

2. Install the Wireless Client Manager using the provided Software Utility CD.

Note: When connecting the hardware, note that this Wireless LAN Card is for use with UL

listed I.T.E. computers.

After completing the steps listed above, if you need to set up the TCP/IP protocol to

communicate with your network, refer to “Appendix C Setting Up TCP/IP” for details.