User Manual

Chapter 2 - Installing the Wireless LAN Card
5
After completing the steps above, if you need to set up the TCP/IP protocol to communicate
with your network, refer to “Appendix C Setting Up TCP/IP” on page 63 for details.
System Requirements
To use the Wireless LAN Card, your computer must meet the following minimum
requirements:
! Windows 98(SE)/Me/2000/XP/NT4.0 (for Wireless LAN PCMCIA Card)
! Windows 98(SE)/Me/2000/XP (for Wireless LAN USB Card)
! 32 MB of RAM, additional memory recommended
! Standard
PCMCIA
slot/
USB
port
Wireless LAN Card Status LEDs
The two LEDs on the Wireless LAN Card indicate connection status and data transfer
operation status, as described below:
LED Color State Description
Power Red On The adapter is plugged into the
PCMCIA
slot/
USB
port of
your computer.
Activity Green Blinking Transmission mode. The faster the LED blinks, the higher
the data exchange rate.