Product Specs

无锡威达智能电子股份有限公司 JL-8.3-13
15
四、遥控器按键操作说明
Remote Control key action Description
1、 当遥控器未连接上机顶盒时，发送红外键值；连上机顶盒蓝牙，遥控器
发蓝牙键值；
When the remote control is not connected to the set-top box, the
infrared key value is sent; when the set-top box Bluetooth is connected,
the remote control sends the Bluetooth key value;
2、 指示灯状态：遥控器上电后，指示灯常亮 1 秒，未连接状态下，指示灯
连续闪烁 6 下；连接状态下，按按键指示灯不亮，使用语音时，指示灯
常亮，指示灯为红色。
Infrared State: When the remote controller is powered on, the indicator
light is always on for 1 second， In the unconnected state, the light
flashes continuously for 6 times; In the connected state, the indicator
light is off when the button is pressed. When using voice, the indicator
light is always on and the indicator light is red.
3、 配对功能：当同时按住 “OK”和 “Vol-”键并持续三秒，同时指示灯
闪烁；配对广播包时间为 2 分钟,超时后，指示灯熄灭；
Pairing function: When the "OK" and " Vol- " keys are kept down for
three seconds, while the LED are blinking,Pairing broadcast packet time
is 2 minutes，After timeout, the indicator light goes out;
4、 恢复出厂设置：当同时按住“OK”和“Vol+”键并持续三秒，等待指示灯闪烁 3 下
后，表示此时遥控器以及恢复出厂设置；
Rest factory settings: When you press and hold the "OK" and "Vol+"
buttons at the same time for 3s, and wait for the LED to flash 3 times,
it means that the remote control and factory settings are rested;
Connection interval＜12ms；
遥控器距离>10m；
Remote control distance >10m;
5、 支持蓝牙遥控器在线升级，盒子上电时自动检测遥控器版本，版本低于
服务器推送版本时自动升级；