User's Manual
Page6/25
CHAPTER 1: CONNECTIONS AND SETUP
Turning on the Wireless Gateway
If there is no lighted LEDs on the front panel, check the power adapter plug-in the power jack and connect to
CM correctly.
After installing the Wireless Gateway and turn it on for the first time (and each time the modem is
reconnected to the power), it goes through several steps before it can be used. Each of these steps is
represented by a different pattern of flashing lights on the front of the modem.
Note: All indicators flash once before the initialization sequence.
If both DS and US LEDs are flashing, it means the Wireless Gateway is automatically updating its system
software. Please wait for the lights to stop flashing. Do not remove the power supply or reset the Wireless e
Gateway during this process.
Introduction
Wireless Gateway Features
z FullBandCaptureFrontEnd
z Increasesperformancewith50%increaseinCPUspeed.
z AddsApplicationsCPUtorunLinuxapplications.
z LowersPowerwithAdvancedPowerManagement
z AdvancedProcessorarchitecture.
z High‐SpeedMemoryarchitecture.
z IntegratedIPTVsolution.
z ExcentisDOCSIS1.0/1.1/2.0/3.0StandardCompliant.
z SupportMultipleProvisioningMode.
z FourStandardRJ‐45connectorfor10/100/1000BaseTEthernetwithauto‐negotiationandMDIX
functions;SupportmaximumEthernetcablelengthupto100m(Category5).
z SupportV.90faxandmodemservices.
z 56bitsDESand128bitsAESdataencryptionsecurity.
z SNMPnetworkmanagementsupport.
z 802.11b/g/nsupported,20/40Mhzbandwidth,300MbpsMaximumdatarate.
z BCM43227support2.4Ghzonly.
z SupportWebpagesandprivateDHCPserverforstatusmonitoring.
z Propane™technologysupported,enablingtheconnectionofmoreInternetuserswithoutadditional
networkbandwidth.
z PlugandPlay.