User's Manual

8
Bridging Features
 Supports self-learning bridge specified in IEEE 802.1D Transparent Bridging
 Transparent Bridging between 4-port 10/100 Mb Ethernet switch and 802.11b Wireless LAN
interface

QoS Supports IEEE 802.1p tag for
prioritize layer 2 traffic on 4-port Ethernet Switch
 Port based priority that can prioritize specific port for multimedia streaming applications
 Security Features
 PAP (RFC1334), CHAP (RFC1994) for PPPoE session
 Wireless support WEP (Wired Equivalent Privacy) uses RC4 with 40/64 and 128 bit key length
 Support IP packets filtering based on IP address, Port number, Protocol type and TCP code
Wireless LAN Features
 Fully compatible to 802.11b standard, allowing up to 11Mbps wireless rate with distance up to
300 feet / 90 meters
 The 2.4 GHz Direct Sequence Spread Spectrum (DSSS) technology is exploited.
 Seamless roaming within wireless LAN infrastructure
 Low power consumption via efficient power management
 Configuration and Management
 Configurable through Web Browser
 HTTP firmware upgrades via Web browser directly
 Support DHCP Server function for IP distribution to local network users
 QoS setting allows prioritizing one of 4 switch ports. The prioritized port could also be changed
 Event Logging, also provide different level of event display
System Requirements
For Wireless Clients
- System OS (Windows 98/2000/NT/ME/XP)
- Wireless card
- Wireless card driver
For Ethernet (wired) Clients
- System OS (Windows 98/2000/NT/ME/XP)
- 10/100Base-T NIC
- 10/100Base-T (UTP) network cable.
- Hub
Note
xDSL/Cable Modem service registered from your Internet service provider (ISP) is
required for Internet access.