User's Manual

46
QOS
The Broadband Home Router comes with 4 10/100 Base-TX ports. It is capable of
auto-sensing the Ethernet switching hub if a non-crossover cable is attached. In this page,
you can select whether to enable or disable QOS management function. You also can set the
priority for each switch port and select whether to enable or disable the 802.1P.
System
Management
Security
For administration security, specify required User Name and Password. It limits this
web-based manager access to users with the correct password. By default, the user name and
password is admin and admin respectively.
After clicking Apply to change the and password, the new setting takes effect currently.
When you continue to access other pages, you will be prompted to re-login with new
and password immediately.
To save the new settings to flash memory and take effect next time your reboot the
Broadband Home Router, after clicking Apply you should perform the task of Save &
Restart.