User's Manual

Software setup
43
Example: If you want to filtering a specific network 192.168.0.10 from accessing the HTTP
server at 220.189.78.21 you should add a filter attributes as below:
Protocol type/as Source IP Destination IP
Port Range
Start/End
InBound OutBound
TCP/21 192.168.0.10 220.189.78.21 21/21 Allow Block
*The packets matching the criteria will be blocked; those beyond these filtering rules can pass through the
Broadband Home Router.
If you also want to filtering corresponding service from Internet just need set Inbound to
“Block”.