User's Manual

wireless client. To use manual entry, check Hex option and then enter your WEP keys. WEP

keys must be comprised of the hexadecimal characters (0-9, A-F, and a-f) and must contain 10

characters for 64-bit WEP Keys or 26 characters for 128-bit WEP keys.

Configuring the SSID & Desired Channel.

1. On the page, if necessary you can edit the SSID.

2. Select the Desired Channel

3. You can select Shared Key and set the Encryption Key Length as 64-bit or 128-bit.

4. Click “Apply “.

Routing

Dynamic Routing

Routing Information Protocol (RIP) is utilized as a means of exchanging routing information

between routers. It helps the routers to determine optimal routes. This page allows you to

enable/disable this function.

By default, RIP is disabled with Disable selected. You are allowed to enable RIP over the

LAN/WAN interface. Upon each interface, you can customize the RIP on Receive Mode and

Transmit Mode respectively.

Receive Mode: It incorporates the RIP information when receiving the RIP packets.

Transmit Mode: It broadcasts the routing table.

RIP Version: When enabling RIP, you can select the RIP version from RIPv1, RIPv2 or both

(RIPv1 and RIPv2).

Disable RIP: To disable RIP, just select Disable from the drop-down list.