User's Manual

Software setup
37
WAN Setting
This section shows you detailed description over the WAN connections setting. The Router
provides four connection type for you choice.
Common
Default Gateway: This function allows you to set up the default gateway on the WAN
interface of your router. You can check the Specify an IP Address box and enter the gateway
IP address provided by your ISP.
DNS IP address: Set up the IP address of the primary and secondary DNS (Domain Name
System) server. The DNS server address will be passed to the DHCP clients along with the IP
address. The DHCP clients use the DNS to map a domain name to its corresponding IP
address and vice versa.
NTP Function:
Allows you to enable NTP (Network Time Protocol) function and maintain Date and
Time on LCD by NTP Server.. If you have designated time server to synchronize the date and time of
network computers, you can check Specify an IP Address and then enter the IP address of the time
server.
Bridge:
By selecting “Bridge” mode you enable bridging over the WAN port. The router can bridge
the packets from your local network to the remote LAN over the WAN port.
Obtain an IP address automatically:
With this option selected, the Broadband Home Router will get a dynamic WAN IP address