User's Manual

Wireless Broadband Rout er User’s Manual
38
IP Address: Allows you to specify the private IP address on the device’s LAN interface.
By default, the IP address and subnet mask is 192.168.1.1 and 255.255.255.0. It is
recommended NOT to change the default settings.
Note: I f you have changed t he LAN I P address for t he rout er, you have t o renew or reassign
t he LAN I P for client’s PC. Ot herwise, t he client ’s PC will not be able t o access t he rout er.
Subnet Mask: Type in the subnet mask address that you get from your service provider.
The Gateway acts as DHCP Server: Check Enable to make gateway be able to act as DHCP server.
IP Pool Starting Address: Make the IP address you enter here to be the starting point.
IP Pool Ending Address: Make the IP address you enter here to be the ending point.
Lease Time: Specify the time that a network device can lease a private IP address before the Wireless
Broadband Router reassigning the IP address. By default, it is 1 day/ 0 hour/ 0 minutes.
Local Domain Name: You can check the Report this host as the DNS server box to use this host as the default
DNS. Or you can uncheck the box and manually set up the DNS IP address in the
Primary/Secondary DNS IP address fields. The DNS server addresses will be passed to
the DHCP clients along with the IP addresses. The DHCP clients use the DNS to map a
domain name to its corresponding IP address and vice versa.
D
D
H
H
C
C
P
P
C
C
l
l
i
i
e
e
n
n
t
t
L
L
i
i
s
s
t
t
DHCP Clent List shows the IP address, host name and MAC address of the clients which connected to the Barricade.