User's Manual

Chapt er 3: Concepts for Connection
7
xDSL/ ATU- R Connect ion
The Broadband Wireless Router provides continuous and high-speed access between your wireless and Ethernet
devices. In addition, it can connect your entire network to the Internet through an external broadband access device.
Note:
The attached xDSL/ ATU-R m ust provide a standard 10Base-T Et hernet connection. Please use
the Ethernet cable com es with your broadband device or any ot her standard 10Base-T Et hernet
cable.
The Ethernet cable supplied by your ISP for connecting to your xDSL/ATU-R may be an Ethernet crossover cable or
a straight-through cable. It is important to use the cable provided by your ISP to connect the modem to your
Broadband Wireless Router.
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
n
n
g
g
t
t
o
o
Y
Y
o
o
u
u
r
r
x
x
D
D
S
S
L
L
M
M
o
o
d
d
e
e
m
m
If you are going to connect the WAN port to a DSL modem, follow the steps below:
1. Use the Ethernet cable comes with your DSL modem. Plug one end to the 10Base-T Ethernet port of the
modem, and the other end to the WAN port on your Broadband Wireless Router.
2. Attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your Broadband Wireless Router,
and the other end to a hub or a client PC.
3. At the LAN side, you also can use wireless client at the same time.
4. Set the DSL Modem’s connection mode as bridge mode.
5. Enter the web-based Configuration Manager to configure the WAN setting. Choose the connection type that
you registered from your ISP.
Network 1
Internet
xDSL Modem
Broadband Wireless Router(AP)
Wireless LAN
Ethernet LAN
Network 2
WAN