User's Manual

Chapt er 2: I nstallation
3
C
C
h
h
a
a
p
p
t
t
e
e
r
r
2
2
:
:
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
Conne ct ing t he W irele ss Br oadband Rout er
The Broadband Wireless Router incorporates a four-port switch for connection to your local Ethernet network. The
Ethernet ports are capable of operation at either 10Mbps (10Base-T) or 100Mbps (100Base-Tx), depending on the
Ethernet interface of the attached PC, hub or switch. For any connection which will operate at 100 Mbps, you must
use a Category 5 rated cable, such as the Ethernet cable included with the Broadband Wireless Router.
1. Connect the Ethernet cable with your xDSL/ATU-R to the 10Base-T Ethernet WAN port on your Broadband
Wireless Router.
Note:
The attached xDSL/ ATU-R m ust provide a standard 10Base-T Et hernet connection. Please
use t he Et hernet cable com es with your broadband device or any ot her standard 10Base-T
Et hernet cable.
The Ethernet cable supplied by your I SP for connecting to your xDSL/ ATU-R m ay be an
Et hernet crossover or a st raight - t hrough cable. I t is im port ant to use t he cable provided by
your I SP to connect t he m odem t o your Broadband Wireless Rout er.
2. Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your Wireless Broadband
Router.
3. Connect the other end of the cable to the Ethernet port of the client PC.
4. If you want to connect to a hub for used by many devices, please connect the other end to the uplink port of
the hub.
5. Connect the supplied power adapter to the PWR port of your Router, and plug the other end to a power outlet.