User's Manual

Wireless LAN Access Point User’s Guide
72
Troubleshooting
Cannot Establish Wireless Link to Access Point
You may be able to establish a wireless link to the Access Point by trying the
following:
• Make sure the power to the Access Point is connected and turned on (LEDs
will light on the Access Point).
• Make sure there are no physical connection problems. Make sure the
PCMCIA card is firmly seated and the cables are plugged in securely.
• Make sure the Access Point and wireless clients are configured with the same
SSID and channel. If you don’t know the SSID, use “any” in the SSID box
on the wireless client Configuration page, or leave it blank.
• If you are sure that the Access Point is configured properly, reboot the
Access Point.