User's Manual

Wireless LAN Access Point User’s Guide
4
Access Point Status LEDs
When the power to the Access Point is turned on, the Access Point will perform
its startup diagnostics and initialization. After a few seconds, the LEDs will
display the operating mode of the Access Point.
Six LEDs on the Access Point indicate the connection status and data transfer
operation status of the Access Point. Viewing the Access Point from the
PCMCIA slot end, the LEDs are described in the table below, starting from the
left side.
LED Color State Description
Ready Green On Access Point is in ready mode.
Link Green Blinking Wireless station communicating with the
Access Point.
WireLink Orange On Access Point is connected to an Ethernet
network hub or switch through the RJ-45 port.
WireAct Orange Blinking Access Point is transmitting or receiving data
through the Ethernet port.
LineLink Red On Access Point is connected to a modem.
LineAct Red Blinking Access Point is transmitting or receiving data
through the COM port to a modem.