User's Manual Part 1

I-241W-U LED

Power

[Green Solid]

Power on

[Green Off]

Power off

WAN: only for HSI interface

[Green Solid]

IP connected (the device has a WAN IP address from IPCP/DHCP/Static and

Broadband link is is up) and no traffic detected. If the IP or PPPoE session is

dropped due to an idle timeout, the light will remain green if PON link is still

present. If the session is dropped for any other reason, the light is turned off. The

light will turn red when it attempts to reconnect and DHCP or PPPoE fails.

[Green and Red Off]

Broadband physical connection power off, device in bridged mode with no IP

address assigned to the device, or Broadband physical interface connection not

present

[Green Flash]

IP connected and IP Traffic is passing thru the device (either direction)

[Red]

Device attempted to become IP connected and failed (no 802.1x, DHCP, PPPoE,

PPPoA response or authentication failure, etc.)

GPON

[Red Solid]

No PON detected, (O1)

[Red Flash]

PON connected, but not ranged (O2, O3)

[Green Solid]

Registered and in service (O5)

[Orange Flash]