User's Manual

22
Name Configuration
IP address of the
gateway
IP address of the gateway for the HG520s to
access the network is provided by the ISP.
DHCP mode of the
HG520s
Enable the DHCP server.
3.7.2 Steps
1. Configuring the HG520s
Follow the steps described below:
(1) Log in to the Web configuration page. For the procedure,
refer to 2.3 "Establishing Configuration Environment".
(2) Select Basic > WAN Settings in the navigation tree to
display the WAN configuration page.
(3) In the WAN configuration page, select the PVC that needs to
be configured. Click the editing icon of the PVC to display the
configuration page.
(4) Select Bridged+Static IP in the PVC configuration page.
Set the operation mode to Enable. Configure relevant
parameters in Figure 3-5 according to the values in the
Table 3-5.