User's Manual

21
(7) Select DHCP Server in the DHCP configuration page. Click
Submit.
(8) Select Tools > Save & Reboot in the navigation tree.
(9) Select Save in the Save/Reboot page. Click Submit to save
the configuration.
(10) Select Reboot in the Save/Reboot page. Click Submit to
reboot the HG520s.
2. Configuring Your Computer
Configure your computer NIC, to enable the computer to
automatically obtain information such as the IP address, gateway and
DNS.
3.7 Configuring the Static IP Mode
This section mainly describes the process to configure the
HG520s in the static IP mode and the process to configure your
computer to access the network through the HG520s.
3.7.1 Preparation
Table 3-5 shows the configuration preparation.
Table 3-5 Configuration for the static IP mode
Name Configuration
PVC mode Static IP
PVC operation mode Enable
Default route Enable
VPI/VCI Provided by the ISP
Encapsulation Provided by the ISP
IP address/subnet
mask
IP address and subnet mask for the HG520s to
access the network are provided by the ISP.