User's Manual

2. Configuring Your Computer

Configure your computer NIC, to enable the computer to

automatically obtain information such as the IP address, gateway and

Domain Name Server (DNS).

3.5 Configuring the PPPoA mode

In the PPPoA mode, the HG520s uses the built-in PPP dial-up

software to dial a number.

Configuring PPPoA mode is similar to configuring PPPoE mode.

The only difference is that you have to select PPPoA in the PVC

configuration mode to configure PPPoA and select PPPoE to configure

PPPoE. For details, refer to 3.4 "Configuring the PPPoE Mode".

3.6 Configuring the DHCP Mode

This section mainly describes the process to configure the

HG520s in the DHCP mode and the process to configure your

computer to access the network through the HG520s.

3.6.1 Preparation

Table 3-4 shows the preparation for the configuration.

Table 3-4 Configuration for the DHCP mode

Name Configuration

PVC mode DHCP

PVC operation mode Enable

Default route Enable

VPI/VCI Provided by the ISP

Encapsulation Provided by the ISP

DHCP mode of the HG520s Enable the DHCP server