User's Manual

17
Name Configuration
Encapsulation Provided by the ISP
Username and password for the
PPPoE dial-up
Provided by the ISP
DHCP mode of the HG520s Enable the DHCP server
 Note:
After the DHCP server is enabled, the HG520s allocates the private IP
address for the computer.
3.4.2 Steps
1. Configuring the HG520s
Follow the steps described below:
(1) Log in to the Web configuration page. For the procedure,
refer to 2.3 "Establishing Configuration Environment".
(2) Select Basic > WAN Settings in the navigation tree to
display the WAN configuration page.
(3) In the WAN configuration page, select the PVC that needs to
be configured. Click the editing icon of the PVC to display the
configuration page.
(4) Select PPPoE in the PVC configuration page. Set the
operation mode Enable. Configure the relevant parameters
in Figure 3-3 according to the values in the
Table 3-3.