User's Manual

16
(3) Click Next in the New Connection Wizard dialog box.
(4) Select Connect to the Internet and click Next.
(5) Select Set up my connection manually and click Next.
(6) Select Connect using a broadband connection that
requires a username and password and click Next.
(7) Enter the name of the connection. You can name it as you
like. Then click Next.
(8) Select an option from Anyone's use or My use only and
click Next.
(9) Enter the username and password. Then click Next.
(10) Click Finish.
3.4 Configuring the PPPoE Mode
In the PPPoE mode, the HG520s uses the built-in PPP dial-up
software to dial a number. The HG520s serves as a router to connect
your computer to the network.
This chapter describes the process to configure the HG520s to
work in the PPPoE mode and the process to configure your computer to
access the network through the HG520s.
3.4.1 Preparation
Table 3-3 shows the configuration preparation.
Table 3-3 Configuration for the PPPoE mode
Name Configuration
PVC mode PPPoE
PVC operation mode Enable
Default route Enable
DNS Enable
VPI/VCI Provided by the ISP