User's Manual

Table 3-2 Configuration for the pure bridge mode

Name Configuration

PVC mode Pure Bridge

PVC operation mode Enable

VPI/VCI Provided by the ISP

Encapsulation Provided by the ISP

PPP dial-up software

Install the PPP dial-up software on your

computer to access the Internet (The

Windows XP operating system is provided

with the PPP dial-up software)

Username and password for

the PPPoE dial-up

Provided by the ISP

3.3.2 Steps

Configure the following equipment:

 The HG520s

 Your computer

1. Configuring the HG520s

Follow the steps described below:

(1) Log in to the Web configuration page of the HG520s. For the

procedure, refer to 2.3 "Establishing Configuration

Environment".

(2) Select Basic > WAN Settings in the navigation tree to

display the WAN configuration page.

(3) In the WAN configuration page, select the PVC that needs to

be configured. Click the editing icon of the PVC to display the

configuration page.