User's Manual

12
3.2 Service Modes of the HG520s
The HG520s supports multiple service modes and the
configuration of the DSLAM at the office end should be taken into
consideration when a service mode is being selected. The various
service modes are listed in Table 3-1.
Table 3-1 the HG520s service mode introduction
Service
Mode
Working Method Configuration
Pure
bridge
 Take the HG520s as pure bridge
equipment.
 Use the PPPoE dial-up software of the
computer to dial a number.
Refer to 3.3
"Configuring the
Bridge Mode".
PPPoE
 Take the HG520s as a router.
 Use the built-in PPPoE dial-up software
of the HG520s to dial a number.
 Use the PPPoE/PPPoA encapsulation
mode to encapsulate the packets.
Refer to 3.4
"Configuring the
PPPoE Mode".
PPPoA
 Take the HG520s as a router.
 Use the PPPoE dial-up software of the
HG520s to dial a number.
 Use the PPPoA encapsulation mode to
encapsulate the packets.
Refer to 3.5
"Configuring the
PPPoA mode".
DHCP
 Take the HG520s as a router.
 The ISP dynamically allocates the IP
address for the HG520s to access the
Internet.
 Use the IPoE/IPoA encapsulation
mode to encapsulate the packets.
Refer to 3.6
Configuring the
DHCP Mode".
Static IP
 Take the HG520s as a router.
 The HG520s uses the static public IP
address to access the Internet.
 Use the IPoE/IPoA encapsulation
mode to encapsulate the packets.
Refer to 3.7
"Configuring the
Static IP Mode".