User's Manual

8
Step To... Do...
2
Make sure not
to use the proxy
server.
The process to unselect this function is described
below taking Internet Explorer 6.0 as an example:
(1) Start the Internet Explorer. Select Tools >
Internet Options... to display the Internet
Options dialog box.
(2) Select the Connections tab. Click LAN
Settings....
(3) Deselect Use a proxy server for your LAN
(These settings will not apply to dial-up or
VPN connections).
3
Log in to the
Web
configuration
page
(1) In the address bar of Internet Explorer, enter
http://192.168.1.1 (the default IP address of
the HG520s). Then press Enter. The login
window is displayed.
(2) Enter the username and the password of the
administrator in the login window.
When the password is authenticated, you can
access the Web configuration page.
 Note:
After configuring the working parameters of the HG520s, configure the
computer (such as resetting the IP address of the computer or installing
the dial-up software) according to the configuration status of the
HG520s. Then the computer can access the Internet through the
HG520s. For details, please refer to Chapter 3 "Service Configuration".
2.4 Introduction to the Configuration Management
Interface
The Web configuration page of the HG520s is divided into two
parts: