User's Manual

6
Connect the HG520s as follows:
Caution:
Before connecting the HG520s, power off the HG520s and your
computer.
(1) Connect the interfaces of the splitter with the corresponding
equipment by using the telephone line.
 Connect the LINE interface of the splitter with the telephone
jack on the wall.
 Connect the MODEM interface of the splitter with the ADSL
interface of the HG520s.
 Connect the PHONE interface of the splitter with the
interface of the telephone line.
(2) Connect the Ethernet interface of the HG520s with the
Ethernet interface of the computer by using the straight
through network cable.
(3) Plug the output end of the provided power adapter into the
power input interface of the HG520s; plug the other end into
the power socket.
(4) Press the Power button of the HG520s in the rear panel to
power on the HG520s.
Check the Power indicator in the front panel of the HG520s.
If it is on, the HG520s is powered on.