User's Manual

Table 1-2 shows descriptions of interfaces and buttons in the rear

panel of the HG520s.

Table 1-2 Descriptions of Interfaces and Buttons[a2]

Interface/Button Description

Antenna Antenna for wireless Internet access.

ADSL

RJ-11 connector for connection with the telephone jack

or a splitter through a telephone line.

LAN1~4

RJ-45 connector for connection with the Ethernet port

of a computer or a LAN hub.

RESET

To make the equipment restored and restarted, press

the RESET button and release it within 3 seconds. To

make the equipment restore the default settings of the

HG520s, press the RESET button and release it after 3

seconds. Once you use this function, all your

customized settings will be lost. Therefore, please be

careful with it.

POWER Connect to the power adapter.

ON/OFF Switch on/off HG520s.

1.2.3 Splitter

The external splitter can efficiently reduce the signal disturbance

on the telephone line. When voice and data are transmitted through the

same telephone line at the same time, you need an external splitter to

separate the voice and data signals:

 LINE: Connecting to the phone jack on the wall.

 PHONE: Connecting to the telephone.

 MODEM: Connecting to the ADSL interface of the HG520s.