User's Manual

User Guide ADSL Router (RTA1435VW)
3. HARDWARE FEATURES
3.1 LED Indicators
This section explains the LED States and Descriptions of your Router. LED indicators are used to verify the unit ’s
operation and status.
Figure 1. Front View of IMS Router
LED States and Descriptions
LED
POWER
Solid Red
Solid Green
VERSAPORT™2
(LAN/WAN)
Flashing Green
Off
ETHERNET
(LAN 1-4)
Solid Green
Flashing Green
OFF
WIRELESS
Solid Green
Flashing Green
Solid Amber
Off
State
Solid Green
OFF
Description
Router power is ON.
Router power is OFF.
POST (Power On Self Test), Failure (not bootable) or Device
Malfunction. Note: The Power LED should be red no longer than
two seconds after the power on self test passes.
Powered device is connected to the associated port (includes devices
with wake-on LAN capability where slight voltage is supplied to an
Ethernet connection).
10/100 Base-T Ethernet WAN activity is present in either direction.
Router power is OFF, no cable, or no powered device is connected to
the associated port.
Powered device is connected to the associated port (includes devices
with wake-on LAN capability where slight voltage is supplied to an
Ethernet connection).
Ethernet LAN activity is present (LAN traffic in either direction).
Router power is OFF, no cable or no powered device is connected to
the associated port.
Wireless is enabled and functioning.
Wireless LAN activity present (traffic in either direction).
Wi-Fi Protected Setup in progress
Wireless is disabled or not functioning.
5 January 2008 530-300547 Rev. 2