User's Manual

User GuideADSL Router (RTA1435VW)
IMPORTANT: When you first establish a PPP session, you must use the factory default connection name
“MainPPP” to connect to your ISP. Then, if you want set up additional profiles, you may use connection names
of your choice. The Connection Name is the name associated each connection profile. The Account ID and
Account Password are provided by your Internet service provider and must be used for each connection profile
that you set up.
3.
4.
Type in the Account ID as provided by the Internet Service Provider.
The Account ID allows a maximum of 255 characters.
Type in the Account Password as provided by the Internet Service Provider.
The Account Password will be masked with asterisks for extra security. This field allows a
maximum of 255 characters.
At the field labeled Connection, select the connection type (Manual, On Demand, or Always On) that you
want to use with this connection name. The factory default connection type is “Always On.”
Select the MRU Negotiation and LCP Echo settings that you want to use with this connection name. For
details on these settings, click on the Help link on the right side of the screen.
Click Save to save any changes that you have made to this screen.
Click Back to return to the main Connection screen.
5.
6.
7.
8.
NOTE: If you click
Back before you click Save, the previously saved settings will remain active, and any recent
changes that you have made to this screen will not take effect. You must click Save to save the settings.
9. After you have set up your connection profile and clicked Save, click the Connect button to establish a PPP
session.
530-300547 Rev. 2 14 January 2008
ADSL Router (RTA1435VW-D27)