User's Manual

User Guide ADSL Router (RTA1435VW)
5.2 Confirming a DSL Sync
You must have active DSL service before the Router can synchronize with your ISP ’s equipment. To determine if
the DSL sync is established, check the Router ’s DSL LED. If the DSL LED is not solid green, you do not have a
DSL sync established. Contact your Internet service provider for further instructions. The Router will handle
transmission rates up to 8 Mbps. Your actual DSL rates may vary depending on your Internet service provider.
After connecting the hardware for your IMS Router, start your Internet browser and type http://192.168.1.1/ in the
browser’s address bar. Next, press ‘Enter’ on your keyboard. The following Home screen will be displayed.
View the DSL Speed at the Broadband Connection field. If the status reads Down, check the DSL physical connection.
The following screen shows the DSL connection rate with values that indicate a successful DSL SYNC has been
established. The connection rate values represent the transmission speed of your DSL line. (The Router may take time to
report these values.)
530-300547 Rev. 2 12 January 2008
ADSL Router (RTA1435VW-D27)