User's Manual

Chapt er 3: Configurat ion
5
For connecting through a hub, please refer to the following diagram for an example.
USB Driver I nstallat ion
If the ADSL Router is connected to a PC through USB interface, you will be prompted for the USB
drivers when plugging the USB cable to the PC. Refer to the relevant operating system to install the
USB drivers. Otherwise, you may skip this chapter.
Note: This section is for the m odel wit h USB int erface only. I f
your rout er does not support USB int erface, please skip t his
section.
For W indow s M E
n Run the USB installation program from the CD provided by your router package.
o An InstallShield Wizard will appear. Please wait for a moment.
p When the InstallShield Wizard Complete appears, click Finish.
q Plug the USB cable between your router and PC.
Note: I f t he USB device is not detected, check t he USB cable
bet ween t he PC and t he device. Also verify t hat t he device is
power on.
r The USB driver installation finished. You can use the router now.
For W indow s 2 0 0 0
n Run the USB installation program from the CD provided by your router package.
o An InstallShield Wizard will appear. Please wait for a moment.