User's Manual

Wireless Broadband Router User Manual

3.2 Setting up Wireless Client

If you choose to access the router via a wireless client, also verify

the following:

1. Make sure your PC is equipped with 802.11g or 802.11b

wireless adapter and has appropriate WLAN card driver/utility

and TCP/IP installed.

2. Set the wireless adapter to use appropriate TCP/IP settings as

described in previous section.

3. Launch the wireless adapter’s provided utility and verify that

your wireless client is configured with these settings:

• Operation Mode: Infrastructure

• SSID: 11g AP

• Authentication: Open

• WEP Mode: Disabled