User's Manual

IP address mode: If your network had implemented a DHCP server to assign an IP to this
AP, you can select DHCP as the IP Address mode. And you don’t need
to type the IP address below, subnet mask and gateway for the DHCP
server will provide the required IP information for this device.
If you want to assign a static IP address to your AP, you can select Static
IP option. Then you have to type in the IP address, subnet mask,
gateway in the boxes respectively.
Note: When the DHCP function is enabled, you may need a third-party
tool to identify the AP’s IP address for the IP address assigned to the
AP could come from a large DHCP address tool.
IP address: Type in the IP address that you got from your ISP.
Netmask: Type in the netmask address that you got from your ISP.
Default Gateway: Type in the gateway address that you got from your ISP.
Apply: Click this button to save and make the configuration effective.
Administration
This page allows you to change the username and password for some reason. Please open
Administration web page to change it as you desired.