User's Manual

this function.
WEP Key Lengths: Select the WEP mode for the WEP key function. You can choose 40, 104
or 128-bit for your necessity. Choose the typing method of encryption
key. You have to click either Hexadecimal digits or ASCII Text
characters.
Hexadecimal ASCII
40 bits
(WEP 64 bits)
10 hexadecimal digits 5 ASCII characters
104 bits
(WEP 128 bit)
26 hexadecimal digits 13 ASCII characters
128 bits
(WEP 152 bit)
32 hexadecimal digits 16 ASCII characters
WEP Key 1 to 4: Type the encryption key length and fill out WEP keys. The system
allows you to type in 4 kinds of the WEP key.
Default Key: Select one of network key that you set on the Key boxes as default one.
After you entering your WEP keys, you should select one of the four
keys to encrypt the data before being transmitted. The AP always
transmits data encrypted using the WEP key. The receiving station will
use the key number to determine which key to use for decryption. If the
key value does not match with the transmitting station, the decryption
will fail. To ensure successful decryption, make sure to have your
wireless stations set identical key tables.
Frequency (Channel): This function is active only in Ad-Hoc connection type. The frequency
you selected in which the radio links are about to be established. Select a
channel that you want. Usually the wireless clients will scan the whole
operable channels and then select the desired communications channel
automatically.
Data Rate: It decides the speed of data transmission. Choose any one of it by using
the drop-down menu.