User's Manual

4. Web Configuration
39
Filter Scenario of the Wireles Broadband Router
When setting up your firewall policy, note the filter scenario used
by the router:
When Filter Type is Listed Block:
If all the filters are disabled: No filter rule is specified to
block any packet. All packets can pass through the WAN
port. (Defaults)
If any filter is enabled: only the packets matching the
specified rule are blocked; other packets can pass through
the WAN port.
When Filter Type is Listed Pass:
If all the filters are disabled: No filter rule is specified to
allow any packet to pass. All packets are blocked.
If any filter is enabled: Only the packets matching the
specified rule can pass; other packets are blocked.
Figure 4-14 Filters