User's Manual

Wireless Broadband Router User Manual

Checking/Renew IP Address under Windows NT

The following steps help you verify if your network adapter gets an

IP address within the DHCP IP pool range (192.168.1.100 ~

192.168.1.150 by default) of the router. If not, you may need to

renew the IP information.

Step 1 Click Run from the Start menu to open the Run dialog

box.

Step 2 Type cmd in the dialog box and then click OK.

Step 3 At prompt, type ipconfig to see the IP information from

DHCP server.

Step 4 If you want to get a new IP address, type ipconfig

/release to release the previous IP address and then type

ipconfig /renew to get a new one.

For Windows 2000

Step 1 From the Start menu, point to Settings and then click

Network and Dial-up Connections.

Step 2 Right-click the Local Area Connection icon and then

click Properties.

Step 3 On the General tab, highlight Internet Protocol (TCP/IP)

and then click Properties.

Step 4 Enable Obtain an IP address automatically and then

click OK.