User's Manual

Troubleshooting
Gateway
No image on TV
Check that the Power and HDMI cables are properly
connected.PowertheGatewayoandonagain.Checkthe
input source on the TV
No content in the media library
Please refer to section „Play your on content“ of this
manual.
Remote
Remote not working / New remote
Remove the batteries from your remote control.
PresstheOKbuttononyourremoteandthenreinsertthe
batteries.
Reconnect the QBee Gatewy to the remote. Press and hold
the WPS button on the Gateway for three seconds.
Done.
Devices
Reconnect Switch or Camera
In case the Switch or the Camera loses the connection
to your QBee Gateway, they have to be paired with the
Gateway again.
Pairing – To do so, press the WPS button of your QBee
Gatewayfor2seconds.TheLEDontheGatewaywillstart
blinking in white.
ThenpresstheWPSbuttonontheSwitchorCamerafor2
seconds.
The LED on the Switch or Camera will start blinking in white.
When the pairing is done, the LED will light continuously in
white.
If the pairing of the Switch or Camera does not work, please
reset your Switch or Camera by pushing the WPS button
for10seconds.ThiswillrestoreyourSwitchorCamerato
factorysettings.Oncetheresetiscomplete,pleaserepeat
the Pairing process.
Camera SwitchQBee Gateway RemotePlay your own content CongureQBeeGateway
LED
O Notpowered
White OK
Blinks white fast SD Card syncing
Blinks white slowly WPS Pairing in progress
Red Booting
Blinks red Problem / Not connected
LED
O Notpowered
White OK
Blinks white WPS Pairing in progress
Red Booting
Blinks red Problem / Not connected
LED
O Notpowered
White OK
Blinks white WPS Pairing in progress
Red Booting
Blinks red Problem / Not connected
WPS Button
Pairing ReconnecttheCamera–press2s
Reset Sets the Camera to its factory settings. Pairing is lost
Press10s–LEDblinksredfast
WPS Button
Pairing ReconnecttheSwitch–press2s
Reset Sets the Switch to its factory settings. Pairing is lost
Press10s–LEDblinksredfast
HDMI
LAN 2I nternet
DC12V
Reset
1
LED
OK
Lens
Power ON/OFF
Back
Temperature Sensor
Power Supply
Humidity Sensor
Menu
Favorites
Power ON/OFF
LAN
Internet
USB 3.0 for Media
Power Supply
WPS Button
HDMI > TV
Headset / Stereo
USB Keyboard/
Mouse
Reset – Press 2 s
SD Card Slot
Sync Button
Navigation
Night Vision LEDs
WPS Button
QBee Home Button
Play/Pause
LED
Camera Stand
Slide up and turn
90° for Wall-Mount
Ambient Light Sensor
Volume Up
Volume Down
Youhavethepossibilitytocongurethenetworksettingsof
your QBee Gateway via the embedded Web UI.
To do so, connect your computer to your Gateway by
using an Ethernet cable and inserting it into the Gateway’s
Internet Port at the back.
Log into the QBee Web UI
1
 Onyourwebbrowser,entertheQBeeGateway’s
defaultIPaddress192.168.1.1
2
 Ontheloginpage,enterthedefaultusername
(admin) and password (admin).
3
 YoucancongurethesettingsofyourQBeeGateway.
QBee allows you to play and view your favourite content –
in any format.
SD card – Insert your SD card and view what’s on it
and sync its contents to the built-in hard drive with
the push of one button.
USB port – Insert your USB drive into the blue USB
port at the back of the QBee Gateway – you can
view and play your content directly from your USB
drive.
Web Services – play and view content from the
Internet.YouTube,SpotifyandTheOnionare
alreadyconguredforyou.
QBee Mobile App – Upload the content from the
App via Media/File Section.
PC/Mac – Copy the content from your computer via
Windows/Samba (SMB) or Mac (AFP).
ON/OFF Button
WPS Button
LED
Privacy Button (on top) – LED White > Privacy on
v1 – 122015
LA1
WPS Button
WPS Button
WPS Button