User's Manual

NOTE: Before setting up a VPN connection, you need the IP address or domain name

of the VPN server you are trying to access.

Steps to set up access to PPTP VPN server:

1. From the navigation panel, go to Advanced > Security > VPN > PPTP VPN

Server.

 Enable VPN Server: enable or disable PPTP VPN Server.

 VPN Details: The details of PPTP VPN Server. Select General or Advanced

settings.

 Username and Password: The user information of PPTP VPN Server. Input

the user name and password for the VPN server and click the button.

2. Advanced VPN server settings, as below.

 Broadcast Support: Turns on broadcast relay to clients from the router.

 Authorization Mode: Select Authorization Mode.

 MPPE Encryption: Select MPPE Encryption type.

 Connect to DNS Server Automatically: DNS of PPTP clients.